Welcome to CertificationDumps.com !

Are u looking to Pass your Certification Exam? Then you have came to the right place here you will find real exam questions of any exam taken from the testing center and aslo links to sites that sell them. So now passing your certification exam has become much easier than before all you have to do is memorize the questions you will see exactly the same questions in the real exam. In today world time is money so by this not only you save time plus you aslo save yourself the hassale of failing

November 23 2009

Ericsson ed0-001 Dumps

ericsson msc/bsc competence exam

  • Exam Number/Code : ed0-001
  • Exam Name : ericsson msc/bsc competence exam
  • Questions and Answers : 101 Q&As

Download Pass4sure ed0-001 Dumps from the link below
Download CertifyMe ed0-001 Dumps from the link below
Download Testking ed0-001 Dumps from the link below


Download Ericsson ed0-001 Dumps



PrepKing.com Ericsson ed0-001 Sample Questions

Exam : Ericsson ED0-001
Title : Ericsson MSC/BSC Competence Exam

1. Which of the following commands is used to print the process control in service performance log data?
A. PRINTPROCESS
B. ALIST
C. ISPPRINT
D. ALOGLIST
Answer:C

2. Which of the following commands is used to add a device to the route?
A. EXDRI
B. EXDAI
C. EXDRP
D. EXDRE
Answer:A

3. Which of the following is the correct command sequence for a CP Fault?
A. REPRI,REMRI,RECRI
B. REPCI,REMCI,RECCI
C. RECCI,REPCI,REMCI
D. GSTEI,NTTEI,TCTDI
Answer:B

4. A rolling database of active and previous hardware alarms can be viewed using________?
A. ATR
B. ALB
C. ALV
D. ASM
Answer:B

5. What MOs can be tested with a command-ordered equipment test?
A. TG,TRXC,TX,RX and TS
B. CF,IS,TF,TRXC,TX,RX and TS
C. TG,CF,IS,TF,TRXC,RX,TX and TS
D. TG,TS,RX and TX
Answer:B

6. Which of the following commands is used to define a channel group for a cell?
A. RLDEI
B. RLDGI
C. RLDEC
D. RLDSI
Answer:B

7. Which of the following commands is used to make a copy of backup file RELFSW1 to the oldest file in the SFR group?
A. SYTUC
B. SYNIC
C. SYSFT
D. SYFSC
Answer:C

8. Which file is used for automatic data dumps and automatic system reloads?
A. RELFSW0
B. RELFSW1
C. .RELFSW2
D. RELFSW100
Answer:A


Download Ericsson ed0-001 Dumps


Filed Under (Ericsson) by admin
No Comments Read more

November 23 2009

Ericsson ed0-002 Dumps

ericsson bts competence exam

  • Exam Number/Code : ed0-002
  • Exam Name : ericsson bts competence exam
  • Questions and Answers : 92 Q&As

Download Pass4sure ed0-002 Dumps from the link below
Download CertifyMe ed0-002 Dumps from the link below
Download Testking ed0-002 Dumps from the link below


Download Ericsson ed0-002 Dumps



PrepKing.com Ericsson ed0-002 Sample Questions

Exam : Ericsson ED0-002
Title : Ericsson BTS Competence Exam

1. Bends to RF cables (coaxial) should be a minimum of ten (10) times the cable diameter.
A. RLSTC:CELL=12002B, STATE=HALTED;
B. RLSTC:SITE=12002,STATE=HALTED;
C. RLSTP:CELL=12002B, HALTED;
D. RLSTP:CELL=12002B, STATE=HALTED;
Answer: A

2. What common LED indicators are in the CDU, PSU, BFU, and dTRU?
A. RBS Fault
B. Operational
C. Fault
D. B and C
Answer: D

3. The abbreviation “VSWR” stands for___.
A. Variable Signal Wave Radio
B. Voltage Strength Wire Ratio
C. Very Strong Wave Radio
D. Voltage Standing Wave Ratio
Answer: D

4. What could a flashing green LED indicate in an MRU?
A. Fault is localized
B. Wait, activity in progress
C. Battery Power depleted
D. None of the above
Answer: B

5. What is the proper resistance of an ESD wrist strap?
A. 1 ohm (O)
B. 1 Mega ohm (MO)
C. 10 O
D. 1 MO
Answer: B

6. How many T1s can one DXU-21 support?
A. 1
B. 2
C. 3
D. 4
Answer: D

7. An ESD wrist strap must always be used when handling or installing _____.
A. a DXU
B. printed circuit boards
C. TRU/dTRU
D. All of the above
Answer: D

8. In OMT, what view shows the RUs installed in the GSM cabinet?
A. System View
B. Radio view
C. MO View
D. Cabinet View
Answer: D


Download Ericsson ed0-002 Dumps


Filed Under (Ericsson) by admin
No Comments Read more
prepking

Tag Cloud

Adobe