Are u looking to Pass your Certification Exam? Then you have came to the right place here you will find real exam questions of any exam taken from the testing center and aslo links to sites that sell them. So now passing your certification exam has become much easier than before all you have to do is memorize the questions you will see exactly the same questions in the real exam. In today world time is money so by this not only you save time plus you aslo save yourself the hassale of failing
Download Pass4sure HH0-230 Dumps from the link below
Download CertifyMe HH0-230 Dumps from the link below
Download Testking HH0-230 Dumps from the link below
Download Pass4sure HH0-440 Dumps from the link below
Download CertifyMe HH0-440 Dumps from the link below
Download Testking HH0-440 Dumps from the link below
PrepKing.com Hitachi HH0-440 Sample Questions
Exam : Hitachi HH0-440
Title : Storage Architect – Performance & Virtualization
1. Solaris IOSTAT shows that response times are degrading for a number of LUNs and that these LUNs are 100% busy. The active queue values are in a range up to, but not exceeding 8, and the wait queue values are in the range from 0 to 5 when the active queue is 7 or 8.
Which condition is implied by these values?
A.These are normal values for busy LUNs with a LUN queue depth of 8.
B.There are no more Tags available on this storage port due to heavy IO load.
C.There are no more Tags available for these LUNs at the port due to heavy IO load.
D.The HBA LUN queue depth is set incorrectly.
Answer: A
2. Which three key metrics are needed for sizing industry standard applications? (Choose three.)
A.IO read/write ratios
B.port speed
C.IO rates and data transfer rates
D.cache read hit ratios
E.number of ACP/BED pairs
Answer: ACD
3. Which three parameters will help to calculate a server’s maximum LUN queue depth to avoid the risk of SCSI timeouts? (Choose three.)
A.The number of active LUNs mapped to a storage port.
B.The number of active servers in the cluster accessing the active LUNs.
C.The number of command tags supported by the storage port.
D.The number of disk drives supporting the LUN configuration.
E.The total number of LUNs mapped to the storage port.
Answer: ABC
4. Which level of Write Pending is normal for a busy OLTP Universal Storage Platform (USP) system adequately managing the destaging of writes?
A.0% to 20%
B.20% to 30%
C.30% to 40%
D.40% to 50%
Answer: B
5. Which three statements are true for Hitachi Global Link Availability Manager (HGLAM)? (Choose three.)
A.HGLAM manages multiple instances of Hitachi Dynamic Link Manager (HDLM).
B.HGLAM assigns load balancing algorithms only at the server level.
C.HGLAM can alert which server is impacted when a fabric switch goes down.
D.HGLAM reports IO rate at the HBA level.
E.HGLAM can report a USP cache failure.
Answer: ACD
6. In the Universal Storage Platform (USP) family, what is the maximum number of external ports that one external LDEV can be attached to?
A.2
B.4
C.8
D.16
Answer: C
7. Click the Exhibit button.
Which three conditions are likely causes for the write pending rates illustrated in the exhibit? (Choose three.)
A.insufficient cache
B.loss of redundancy in write cache
C.heavy random writes to RAID5
D.heavy random writes to SATA drives
E.failure to distribute workload among sufficient array groups
Answer: CDE
8. Performance monitor data indicates that CHP utilization may be causing a bottleneck in a Universal Storage Platform (USP) series system during periods of intense processing.
Which two actions should be considered to increase IOPS during the bottleneck periods? (Choose two.)
A.Configure the paths using high-speed mode.
B.Spread the load across more CHP processors and paths.
C.Spread the load across more RAID Groups.
D.Spread the load across more LUNs.
Answer: AB
Download Pass4sure HH0-380 Dumps from the link below
Download CertifyMe HH0-380 Dumps from the link below
Download Testking HH0-380 Dumps from the link below
Download Pass4sure HH0-340 Dumps from the link below
Download CertifyMe HH0-340 Dumps from the link below
Download Testking HH0-340 Dumps from the link below
Download Pass4sure HH0-280 Dumps from the link below
Download CertifyMe HH0-280 Dumps from the link below
Download Testking HH0-280 Dumps from the link below
PrepKing.com Hitachi HH0-280 Sample Questions
Exam : Hitachi HH0-280
Title : HDS Implemetation Specialist – Storage Management
1. In Hitachi Storage Services Manager (HSSM), which two steps are required when discovering a host? (Choose two.)
A. Provide the administrator password.
B. Provide the IP address of the host to be discovered.
C. Install the appropriate CIM extension on the server you want to manage.
D. Click the Set Default User name and Password link and provide up to three user names and passwords.
Answer: BC
2. Your customer currently has Hitachi Dynamic Link Manager (HDLM) version 4.7 running on ten of their production servers. They want to simplify the management of running those HDLM instances.
What are two prerequisites for the hosts that are running HDLM to be managed by Hitachi Global Link Availability Manager (HGLAM)? (Choose two.)
A. Upgrade the HDLM instances to version 5.7 or higher.
B. Install Provisioning Manager agent 3.5 or later on the hosts running HDLM 4.7.
C. Install Hitachi Device Manager agent 3.5 or later on the hosts running HDLM 4.7.
D. Install Hitachi Device Manager agent 3.5 or higher after the upgrade to HDLM 5.2.
Answer: AD
3. A Hitachi Storage Services Manager (HSSM) customer has switches, hosts, and storage. They want to reduce their Get all Element Details (GAED) times.
Which recommendation should you make?
A. Use segmented replication.
B. Put everything in one discovery group.
C. Use the GAED wizard to reduce the time of each element.
D. Increase the memory of the server to reflect the number of discovery groups.
Answer: A
4. A customer has an IBM storage array and is planning to use it as External Storage on the USP V to migrate an application LUN from external to internal.
Would this migration be disruptive for the application?
A. No, because the customer is using Tiered Storage Manager.
B. No, because the customer has a ShadowImage copy of the LUN.
C. Yes, because the server has to perform a reboot to see the LUN.
D. Yes, because the application must reconfigure the LUN presented by the USP V.
Answer: D
5. A customer has Hitachi USP V, Hitachi AMS, EMC DMX, and HP EVA storage systems attached to twenty Windows servers and ten Solaris servers.
In this scenario, which two Hitachi Dynamic Link Manager (HDLM) configurations are supported? (Choose two.)
A. HDLM for UNIX for all storage systems
B. HDLM for Windows for all storage systems
C. HDLM for UNIX for Hitachi storage systems only
D. HDLM for Windows for Hitachi storage systems only
Answer: BC
6. A customer wants to use Hitachi Dynamic Provisioning (HDP) on a USP V.
Which two statements are true regarding the mapping of Dynamic Provisioning (DP)-Volumes to the application? (Choose two.)
A. Any LDEV can be used as a DP-Pool Volume.
B. Any type of RAID group is available for DP-Pool Volumes.
C. The size of a DP-Pool is limited by the size of the DP-Pool LDEVs (max 1 TB).
D. The size of a DP-Pool is limited by the number of the DP-Pool LDEVs (max 256).
Answer: BD
7. A customer is deploying a new USP V into the data center across various servers and operating systems. During the planning stage you identify Hitachi Dynamic Link Manager (HDLM) 5.8 as the preferred path management software on the AIX servers.
Which three must you include in a prerequisite check list for the deployment? (Choose three.)
A. Check that Hitachi Device Manager (HDvM) agent is not installed.
B. Include additional planning for any Virtual I/O (VIO) servers.
C. Check that the Object Data Manager (ODM) update is installed.
D. Check that Hitachi Device Manager (HDvM) is compatible with HDLM.
E. Check the operating system levels and fix packs against the release notes.
Answer: BCE
8. Your 5 TB Hitachi Dynamic Provisioning (HDP) Pool contains one hundred 50 GB LDEVs and is running out of space.
Which two statements are correct? (Choose two.)
A. You create a new Pool and concatenate it with the existing Pool.
B. You create new LDEVs out of free space which are used as HDP Pool Volumes to expand your HDP Pool.
C. You install a new RAID group and create HDP Pool Volumes in this RAID group and add these to your HDP Pool.
D. You create a new Pool which meets the space requirements and you migrate the Virtual Volumes into this newly created Pool.
Answer: BC
Download Pass4sure HH0-240 Dumps from the link below
Download CertifyMe HH0-240 Dumps from the link below
Download Testking HH0-240 Dumps from the link below
Download Pass4sure HH0-015 Dumps from the link below
Download CertifyMe HH0-015 Dumps from the link below
Download Testking HH0-015 Dumps from the link below
Download Pass4sure HH0-400 Dumps from the link below
Download CertifyMe HH0-400 Dumps from the link below
Download Testking HH0-400 Dumps from the link below
PrepKing.com Hitachi HH0-400 Sample Questions
Exam : Hitachi HH0-400
Title : Hitachi Data Systems Architect-Business Continuity
1. What are two best practices for DR testing? (Choose two.)
A.Tests should be done at least twice a year.
B.The secondary copy of data (B) can be used as the DR test copy.
C.Testing should only be performed when new applications are added.
D.When using a point-in-time copy solution, another copy (D) should be used for DR testing purposes.
Answer: AD
2. What are two risks when extending a production SAN over distance? (Choose two.)
A.A telecommunications outage will segment the fabric.
B.RSCN storms may ensue from intermittent telecommunications issues.
C.Any differences in domain IDs on the fabric switches between the sites will keep the fabrics from merging.
D.Some Fibre Channel frames may occasionally cross the inter-site links and reach the incorrect storage array.
Answer: AB
3. A customer is using TrueCopy Asynchronous to continuously replicate a database’s data and log volumes.
Which two statements are true? (Choose two.)
A.A database checkpoint should be forced immediately upon failover.
B.In the case of a planned outage, log volumes may not include all transactions.
C.In the case of an unplanned outage, log volumes may not include all transactions.
D.At recovery time, the database will rollback all uncommitted transactions in the logs.
Answer: CD
4. A customer is using TrueCopy to replicate a database’s data and log volumes.
Which strategy will assist the customer with recovery from logical corruption such as a mistakenly dropped table?
A.Use ShadowImage to create point-in-time copies for recovery.
B.Use TrueCopy for data volumes only. Use log shipping to transfer individual transactions to the recovery facility.
C.Manage database checkpointing so that logs retain sufficient transactions to allow playback up to the corruption event.
D.Inflow control should be used to throttle incoming write traffic so that updates can be identified and prevented prior to their application onto the secondary volumes.
Answer: A
5. A customer’s regulatory requirements require that they will have valid data at the recovery site regardless of any equipment or logical failure in the system or environment.
How many DR site point-in-time copies are required if they want to be able to perform recovery testing?
A.1
B.2
C.3
D.4
Answer: B
6. Which formula is appropriate to use when calculating resource requirements for TrueCopy Asynchronous?
A.Bandwidth = [(peak write Mb/sec) / network compression ratio] + safety margin
B.Journal Capacity = (peak write Mb/sec) * anticipated network outage duration (minimum of 6 GB)
C.Number of RAID groups for journal volumes = (peak write Mb/sec) / (total throughput per RAID group)
D.Host delay = 2 * [(distance between MCU and RCU) / (speed of light in glass)] + losses due to network overhead
Answer: A
Download Pass4sure HH0-330 Dumps from the link below
Download CertifyMe HH0-330 Dumps from the link below
Download Testking HH0-330 Dumps from the link below
PrepKing.com Hitachi HH0-330 Sample Questions
Exam : Hitachi HH0-330
Title : HDS Storage Manager-Business Continuity Enterprise
1. You are looking at the possibility of configuring the Raid Manager software.
Which three devices could be used as a CCI Command Device? (Choose three.)
A.3390-3 LUN
B.LUSE LUN
C.OPEN-V LUN
D.OPEN-3 LUN
E.Virtual LVI/LUN
Answer: CDE
2. Which two statements describe the Command Device? (Choose two.)
A.The Command Device is for CCI communications and can be fully utilized by other applications.
B.The Command Device is dedicated to CCI communications and should not be used by any other applications.
C.The Command Device accepts TrueCopy and ShadowImage software read and write commands that are executed by the storage system.
D.The Command Device accepts TrueCopy and ShadowImage software read and write commands that are executed by the CCI software.
Answer: BC
3. Where do you find the “horcmstart.sh” command in a default CCI installation in a UNIX system?
A./usr/bin/
B./usr/sbin
C./HORCM/
D./HORCM/usr/bin/
Answer: D
4. The CCI instance has failed to start.
What is the most likely cause?
A.The Command Device is labeled.
B.The environment variable HORCC_MRCF is set.
C.The environment variable HORCMINST is not set.
D.The IP address is not referenced in the HORCM file.
Answer: D
5. Which two statements describe the Command Device? (Choose two.)
A.The Command Device is user selected.
B.The Command Device is system selected.
C.The Command Device is a dedicated logical volume on the system which controls the CCI software on the UNIX/PC host.
D.The Command Device is a dedicated logical volume on the system which functions as the interface to the CCI software on the UNIX/PC host.
Answer: AD
6. A pairresync operation is performed on a ShadowImage pair in a PSUE state.
What is the result of the pairresync operation?
A.The pairresync completes immediately.
B.All data on the P-Vol are copied to the S-Vol.
C.The pairresync returns an error because of the PSUE state.
D.The bitmaps are used and only changed tracks are copied from the P-Vol to the S-Vol
Answer: B
7. Which two statements describe the Command Device on UNIX systems? (Choose two.)
A.The volume designated as the Command Device is a raw device.
B.The volume designated as the Command Device is a block device.
C.The Command Device accepts TrueCopy software and ShadowImage software read and write commands that are executed by the CCI software.
D.The Command Device accepts TrueCopy software and ShadowImage software read and write commands that are executed by the storage system.
Answer: AD
8. The CCI instance needs to communicate with the storage system using the Command Device.
Which command should be executed to discover the name of the Command Device on a Windows server?
A.raidscan -x findcmddev hdisk 0,20
B.raidscan -find commanddev hdisk 0,20
C.raidscan -x find commanddev hdisk 0,20
D.raidscan -find commanddevice hdisk 0,20
Answer: A
Download Pass4sure HH0-220 Dumps from the link below
Download CertifyMe HH0-220 Dumps from the link below
Download Testking HH0-220 Dumps from the link below
PrepKing.com Hitachi HH0-220 Sample Questions
Exam : Hitachi HH0-220
Title : HDS Certified Implmenter-Modular
1. What is the purpose of the System Assurance Registration Documentation (SARD) process?
A.To ensure accurate and complete record of pre-installation data.
B.To guarantee that Hitachi Data Systems equipment is insured during transportation.
C.To inform a channel partner that equipment is available for shipment.
D.To validate configuration changes for customers with a premium service contract.
Answer: A
2. There exist Two Command Devices exist on an Hitachi TagmaStore AMS500. ShadowImage has been running for some time. For maintenance reasons, the AMS500 must be restarted. After restarting, only one Command Device is still available.
How will the horcm instances behave in this situation?
A.HORCM will be able to start with a warning message to the startup log.
B.HORCM will not start unless the second Command Device is available again.
C.HORCM will connect to Storage Navigator Modular and define a second Command Device.
D.HORCM will start but go into a wait status until the second Command Device is back again.
Answer: A
3. HiCommand Device Manager can be used to link Universal Volume Manager to manage the Hitachi TagmaStore Universal Storage Platform (USP).
Which three steps must first be performed? (Choose three.)
A.Specify an external volume in the external subsystem.
B.Stop the Common Component and the Device Manager Server.
C.Verify whether DAMP (for Web) runs on the Common Component.
D.Use Device Manager to map and manage the internal and external subsystems.
E.Specify an external subsystem port to be connected to the external port, which will be managed as a specific host for external volumes in the external subsystem.
Answer: ADE
4. Hitachi Data Systems Sales and Services representatives are involved in preparing for the delivery of storage systems at a customer site.
Which three areas will these representatives be asked to look at when following the System Assurance Registration Documentation (SARD) process? (Choose three.)
A.equipment delivery date
B.customer contact details
C.equipment configuration details
D.equipment and feature availability
E.site access details for equipment delivery
Answer: BCE
5. To which LAN should the Hitachi TagmaStore AMS200 controllers be attached?
A.the user’s intranet
B.the AMS200 internal LAN
C.the secure management LAN
D.the Storage Navigator Modular
Answer: C
6. An Authorized Service Provider (ASP) partner has downloaded the System Assurance Registration Documentation (SARD) from the Hitachi Data Systems PartnerXchange Web site to prepare for the installation of an Hitachi TagmaStore AMS200.
Which document is relevant for the partner to use as part of the SARD process?
A.the SARD Excel worksheet
B.the Warranty Accreditation form
C.the Service Acceptance Agreement form
D.the AMS200 System Assurance Document
Answer: A
7. You connect the user LAN ports to an Ethernet switch while installing an Hitachi TagmaStore AMS500 and are unable to communicate although the link LED is illuminated. You are not sure if the user LAN IP addresses are correct.
How can you reset the IP addresses to known values?
A.Connect using a null modem cable to the RS232 port and change the user LAN IP addresses.
B.Press the reset button on the controller three times to reset the IP addresses to factory settings.
C.Connect using a crossover cable to the maintenance LAN port on controller 0 and connect to 10.0.0.17 or 192.168.0.17.
D.Connect using a crossover cable to the maintenance LAN port on controller 0 and connect to 10.0.0.16 or 192.168.0.16.
Answer: D
8. You want to manage an Hitachi TagmaStore AMS500 with Storage Navigator Modular (SNM), but you want to be sure that no one else has access to make changes at the same time.
What are two ways to do this? (Choose two.)
A.Install SNM for Web on only one host and give access to this host for storage administrators.
B.Install SNM Graphical User Interface on several hosts and install the Password Protection key.
C.Install SNM Graphical User Interface on several hosts but connect to the AMS500 in maintenance mode.
D.Install SNM Graphical User Interface on several hosts, and on the SNM restrict changes to the first logon user.
Answer: AB
