Welcome to CertificationDumps.com !

Are u looking to Pass your Certification Exam? Then you have came to the right place here you will find real exam questions of any exam taken from the testing center and aslo links to sites that sell them. So now passing your certification exam has become much easier than before all you have to do is memorize the questions you will see exactly the same questions in the real exam. In today world time is money so by this not only you save time plus you aslo save yourself the hassale of failing

November 30 2009

ISEB BH0-007 Dumps

ISEB Intermediate Certificate in Software Testing

  • Exam Number/Code : BH0-007
  • Exam Name : ISEB Intermediate Certificate in Software Testing
  • Questions and Answers : 25 Q&As

Download Pass4sure BH0-007 Dumps from the link below
Download CertifyMe BH0-007 Dumps from the link below
Download Testking BH0-007 Dumps from the link below


Download ISEB BH0-007 Dumps



PrepKing.com ISEB BH0-007 Sample Questions

Exam : ISEB BH0-007
Title : ISEB Intermediate Certificate in Software Testing

1. Data is transmitted over the internet as a series of packets. Each packet is sent to its destination via the best available route. The decision on the best available route is made by a series of routers on the internet.
In order to make the best decision on the route to take, the router:
1) Scans the destination address and matches it against rules set up in a configuration table.
2) Checks the performance of the primary connection to see if it is good enough to send the packet. If not, it seeks an alternative.
Routers handle many millions of packets being sent at the same time.
Packets can take the form of email messages, data files etc.
A serious issue has arisen with emails arriving at the wrong destinations. This is an intermittent problem, and seems to occur only at peak loading times.
Which of the following reviews would you recommend to address this issue?
A. A walkthrough of the requirement specification, to check for errors.
B. A management review of defects logged and cleared to see if defects are being addressed correctly.
C. A technical review of the industry standard routing protocols to see if they have inaccuracies in them.
D. An inspection of the code for this part of the functionality to try to localise the defective parts of the code.
Answer: D

2. A computerised system is being created to monitor the life support system on board a submarine. It monitors air quality, water supplies and temperature.
This system will be supplied and maintained by SubsInc. SubsInc uses the V-model for software development and conducts four levels of testing, from unit through to operational and site acceptance testing.
Two key risks identified for the air quality system are:
1. If the percentage of oxygen in the air falls too low, personnel may suffocate
2. If the concentration of carbon dioxide in the air rises too high, the air may become toxic.
To address these risks, the requirement specification for this system includes the following requirements:
R1) Oxygen must be replaced as it is consumed.
R2) Carbon dioxide must be removed from the air.
These requirements must be reflected in the functional, technical and program specification documents.
You are a newly recruited test manager.
A risk register has been produced with the following additional risks identified. Which one is a product risk associated with the air quality management system?
A. The system required to monitor oxygen levels may be more expensive than those required to monitor air temperatures.
B. SubsInc may need to recruit extra developers and testers to deliver the project on time.
C. Oxygen levels may reach dangerously low levels.
D. Extreme temperatures may lead to heat exhaustion of personnel.
Answer: C

3. Data is transmitted over the internet as a series of packets. Each packet is sent to its destination via the best available route. The decision on the best available route is made by a series of routers on the internet.
In order to make the best decision on the route to take, the router:
1) Scans the destination address and matches it against rules set up in a configuration table.
2) Checks the performance of the primary connection to see if it is good enough to send the packet. If not, it seeks an alternative.
Routers handle many millions of packets being sent at the same time.
Packets can take the form of email messages, data files etc.
Which of the following would be applicable as part of a test policy for testing these types of systems?
a. Systems must be tested for compliance to industry standard routing protocols.
b. Testing for the latest upgrade will require testing of increased network traffic of 100%.
c. Testing for the fix will require the use of dynamic analysis tools.
d. Releases will not be made if systems have any high priority defects outstanding.
A. a and b.
B. a and d.
C. b and c.
D. b and d.
Answer: B

4. Data is transmitted over the internet as a series of packets. Each packet is sent to its destination via the best available route. The decision on the best available route is made by a series of routers on the internet.
In order to make the best decision on the route to take, the router:
1) Scans the destination address and matches it against rules set up in a configuration table.
2) Checks the performance of the primary connection to see if it is good enough to send the packet. If not, it seeks an alternative.
Routers handle many millions of packets being sent at the same time.
Packets can take the form of email messages, data files etc.
Which of the following best describes a testing challenge of the application domain of the routers described?
A. Testing that the receivers PC can store emails routed to it.
B. Testing that large organisations can scan incoming files routed to them for viruses.
C. Testing that packets are delivered by the routers in the required timescales.
D. Testing that files can be sent in any language.
Answer: C

5. If the concentration of carbon dioxide in the air rises too high, the air may become toxic.
To address these risks, the requirement specification for this system includes the following requirements:
R1) Oxygen must be replaced as it is consumed.
R2) Carbon dioxide must be removed from the air.
These requirements must be reflected in the functional, technical and program specification documents.
You are a newly recruited test manager.
A risk register has been produced with the following additional risks identified. Which one is a product risk associated with the air quality management system?
A. The system required to monitor oxygen levels may be more expensive than those required to monitor air temperatures.
B. SubsInc may need to recruit extra developers and testers to deliver the project on time.
C. Oxygen levels may reach dangerously low levels.
D. Extreme temperatures may lead to heat exhaustion of personnel.
Answer: C


Download ISEB BH0-007 Dumps


November 30 2009

ISEB BH0-005 Dumps

ISEB Certificate in Software Asset Management Essentials

  • Exam Number/Code : BH0-005
  • Exam Name : ISEB Certificate in Software Asset Management Essentials
  • Questions and Answers : 41 Q&As

Download Pass4sure BH0-005 Dumps from the link below
Download CertifyMe BH0-005 Dumps from the link below
Download Testking BH0-005 Dumps from the link below


Download ISEB BH0-005 Dumps



PrepKing.com ISEB BH0-005 Sample Questions

Exam : ISEB BH0-005
Title : ISEB Certificate in Software Asset Management Essentials

1. Which of the following BEST describes the process of license novation?
A. SAM team must inform re-seller that license has been transferred to another department.
B. Software manufacturer allows usage rights to be changed.
C. Software manufacturer allows ownership in unwanted software licenses to be sold to another organisation
D. Software manufacturer allows the transfer of software licenses and contracts when an organisation reforms itself or restructures.
Answer: D

2. An organisations software policy should include information in many areas.
Which of the above areas should be included?
A. All of them
B. 1, 3 and 4 only
C. 1, 2, and 3 only
D. 2, 3 and 4 only
Answer: C

3. Which of the following organisations would you LEAST expect to contact for advice on SAM?
A. BSA
B. BSI
C. FAST
D. itSMF.
Answer: D

4. Which of the following is NOT one of the SAM Logistics processes?
A. Requirements definition
B. Retirement.
C. Licensing Compliance
D. Procurement.
Answer: C

5. Which one of these organisations is responsible for ensuring that the software in use is genuine?
A. Original Equipment Manufacturer
B. Publisher
C. Software reseller
D. None, the onus is on the user organisation.
Answer: D

6. What is the essential FIRST step in initiating a SAM project?
A. Deploy a software usage tool to identify the scale of the problem and document all associated risks
B. Develop and communicate an overall SAM policy
C. Develop and implement a SAM processes and procedures
D. Develop a clear vision and strategy that is owned by senior management.
Answer: D

7. What is the MOST essential activity that should be done after the Business Case is approved and is often overlooked?
A. Continue to sell the business case to users
B. Communicate project progress
C. Show stakeholders the results
D. Include interested parties in the project kick off meeting.
Answer: A

8. Which of the following should be included in the Business Case documentation?
A. All
B. 2, 3 and 4
C. 1, 2 and 4
D. 1, 2 and 3.
Answer: A


Download ISEB BH0-005 Dumps


November 30 2009

ISEB BH0-004 Dumps

ISEB ISTQB Certificate in Software Testing

  • Exam Number/Code : BH0-004
  • Exam Name : ISEB ISTQB Certificate in Software Testing
  • Questions and Answers : 43 Q&As

Download Pass4sure BH0-004 Dumps from the link below
Download CertifyMe BH0-004 Dumps from the link below
Download Testking BH0-004 Dumps from the link below


Download ISEB BH0-004 Dumps



PrepKing.com ISEB BH0-004 Sample Questions

Exam : ISEB BH0-004
Title : ISEB ISTQB Certificate in Software Testing

1. For which of the following would a static analysis tool be MOST useful?
A. Supporting reviews.
B. Validating models of the software.
C. Testing code executed in a special test harness.
D. Enforcement of coding standards.
Answer: D

2. As part of which test process do you determine the exit criteria?
A. Test planning.
B. Evaluating exit criteria and reporting.
C. Test closure.
D. Test control.
Answer: A

3. Which of the following activities should be performed during the selection and implementation of a testing tool?
A. i, ii, iii.
B. ii, iii, iv.
C. i, iii, iv.
D. i, ii, iv.
Answer: D

4. Where may functional testing be performed?
A. At system and acceptance testing levels only.
B. At all test levels.
C. At all levels above integration testing.
D. At the acceptance testing level only.
Answer: B

5. Match the following terms and statements.
A. 1Y, 2Z, 3X, 4W.
B. 1X ,2W, 3Z, 4Y.
C. 1Z, 2X, 3W, 4Y.
D. 1Z, 2Y, 3X, 4W.
Answer: A

6. Given the following decision table:
Which of the following test cases and expected results is VALID?
A. 23 year old in insurance class A Premium is 90 and excess is 2,500.
B. 51 year old in insurance class C Premium is 70 and excess is 500.
C. 31 year old in insurance class B Premium is 90 and excess is 2,500.
D. 43 year old in insurance class C Premium is 70 and excess is 1,000.
Answer: A

7. Which of the following defines the expected results of a test?
A. Test case specification.
B. Test design specification.
C. Test procedure specification.
D. Test results.
Answer: A

8. Given the following fragment of code, how many tests are required for 100% decision coverage?
A. 3
B. 4
C. 2
D. 1
Answer: B


Download ISEB BH0-004 Dumps


November 30 2009

ISEB BH0-002 Dumps

ISEB FOUNDATION CERTIFICATE IN PROGRAMME/PROJECT SUPPORT

  • Exam Number/Code : BH0-002
  • Exam Name : ISEB FOUNDATION CERTIFICATE IN PROGRAMME/PROJECT SUPPORT
  • Questions and Answers : 41 Q&As

Download Pass4sure BH0-002 Dumps from the link below
Download CertifyMe BH0-002 Dumps from the link below
Download Testking BH0-002 Dumps from the link below


Download ISEB BH0-002 Dumps



PrepKing.com ISEB BH0-002 Sample Questions

Exam : ISEB BH0-002
Title : ISEB FOUNDATION CERTIFICATE IN PROGRAMME/PROJECT SUPPORT

1. Which of the following options is NOT a step in a Quality Review?
A. Follow up actions
B. Preparation
C. Review Process
D. Production of the deliverable
Answer: D

2. Complete the following statement choosing the most appropriate option from those below. “The Programme Manager is responsible for..”
A. The programme
B. Technical integrity across projects
C. Co-ordinating the overall programme and constituent projects
D. Business integrity within the programme
Answer: C

3. Which level of plan forms the basis of the project managers day to day control?
A. Stage / Tranche
B. Individuals
C. Project
D. Team
Answer: A

4. The overall responsibility for monitoring and managing the project risk log should be taken by which role
A. Project Manager
B. Risk Owner
C. Project Sponsor
D. Project Support Co-ordinator
Answer: A

5. Who has responsibility for Quality Planning?
A. Project Office
B. Project Team member
C. Project Manager
D. End User
Answer: C

6. Complete the following statement choosing the most appropriate option from those below. “The design authority is responsible for.”
A. Co-ordinating the overall programme and constituent projects
B. The programme
C. Business integrity within the programme
D. Technical integrity across projects
Answer: D

7. The text of an Exception Report will typically comprise of:
A. The cause, the impact, the options, the recommendations
B. How deliverables will be accepted, the reasons for the project, the division of the project into stages
C. How the project will be controlled, roles and responsibilities, who the customer is
D. What happened, when it happened, who made it happen
Answer: A

8. The Internal Rate of Return is:
A. The Discount Rate which produces the highest NPV
B. The Discount Rate which produces the lowest NPV
C. The Discount Rate which matches the normal bank interest rate
D. The Discount Rate which produces a zero NPV
Answer: D


Download ISEB BH0-002 Dumps


November 30 2009

ISEB BH0-001 Dumps

IT Service Management Foundation

  • Exam Number/Code : BH0-001
  • Exam Name : IT Service Management Foundation
  • Questions and Answers : 41 Q&As

Download Pass4sure BH0-001 Dumps from the link below
Download CertifyMe BH0-001 Dumps from the link below
Download Testking BH0-001 Dumps from the link below


Download ISEB BH0-001 Dumps



PrepKing.com ISEB BH0-001 Sample Questions

Exam : ISEB BH0-001
Title : IT Service Management Foundation

1. Following the release of a software upgrade to fix a Known Error, which process is responsible for ensuring that the CMDB is updated correctly?
A. Change Management
B. Problem Management
C. Release Management
D. Configuration Management
Answer: D

2. For which of the following activities is the Service Desk NOT responsible?
A. Escalation
B. Categorisation and prioritisation
C. Impact analysis
D. Root cause identification
Answer: D

3. Which of the following activities is NOT associated with proactive prevention of Problems?
A. Problem Classification
B. Problem Trend Analysis
C. Targeting Support Action
D. Providing information about potential problems to the organisation
Answer: A

4. Which of these statements is correct?
1 Effective Change Management ensures that urgency and impact are used to make decisions on the scheduling of Changes
2 Change Management controls all aspects of the change process
A. Both of them
B. 1 only
C. 2 only
D. Neither of them
Answer: A

5. Which of these is a short-term benefit of introducing Service Level Management?
A. Less calls to the Service Desk
B. Cost of IT services is reduced
C. Customer requirements are established
D. Significant improvements in service levels
Answer: C

6. When building a Cost Model, the cost of providing licences for users to access programs from their PCs would be included in:
A. Software costs
B. Hardware costs
C. People costs
D. Documentation costs
Answer: A

7. In ITSCM, Risk Analysis has three elements used in the calculation to establish risk, which of the following is NOT one of them?
A. Asset
B. Threat
C. Impact
D. Vulnerability
Answer: C

8. Service Management can best be described as:
A. The advancement of the business through sound technology
B. The advancement of the business through quality IT services
C. The better use of technology through partnership with the business
D. The better deployment of support resources to recover costs
Answer: B


Download ISEB BH0-001 Dumps


prepking

Tag Cloud

Adobe