LPI Level 3 Exam 303

• Exam Number/Code : 117-303
• Exam Name : LPI Level 3 Exam 303
• Questions and Answers : 101 Q&As

Download Pass4sure 117-303 Dumps from the link below
Download CertifyMe 117-303 Dumps from the link below
Download Testking 117-303 Dumps from the link below

Download Lpi 117-303 Dumps

PrepKing.com Lpi 117-303 Sample Questions

Exam : Lpi 117-303
Title : LPI Level 3 Exam 303

1. An administrator has successfully configured a cryptographic volume for dmcrypt, and has added the following line to /etc/fstab:
/dev/mapper/cryptvol /media/crypt auto defaults 0 0
Upon booting the system, the error message “mount: special device /dev/mapper/cryptvol does not exist” is displayed. What configuration file has the administrator forgotten to edit? (Provide the full path and filename)
Answer: /etc/crypttab

2. What command will remove the dmcrypt mapping named cryptvol? (Provide the command with any options and parameters)
Answer: /sbin/cryptsetup remove crypt-vol cryptsetup remove crypt-vol

3. Which of the following are common techniques for securing a sendmail server? (Select THREE correct answers)
A. Maintain user accounts in an LDAP directory.
B. Enable TLS.
C. Disable VRFY.
D. Run sendmail in a chroot’d environment.
E. Disable USRLKUP.
Answer: BCD

4. Which LUKS action, when supplied to the cryptsetup command, will initialize a LUKS partition and set the initial key? (Provide only the action name)
Answer: luksFormat

5. What does ntop use for data collection?
A. Network packets
B. Log files
C. Frame relay
D. SNMP
Answer: A

6. SELinux has just been installed on a Linux system and the administrator wants to use SELinux in permissive mode in order to audit the various services on the system. What command will switch SELinux into permissive mode?
A. setenforce 0
B. /etc/init.d/selinux stop
C. selinux passive
D. /etc/init.d/selinux startpassive
Answer: A

7. An administrator has just configured an OpenVPN client. Upon starting the service, the following message is displayed:
TLS Error: TLS key negotiation failed to occur within 60 seconds
Which of the following statements is true?
A. The client was unable to establish a network connection with the server.
B. The client was able to establish a network connection with the server, however TLS key negotiation failed, resulting in a fallback to SSL.
C. The client was able to establish a network connection with the server, however TLS and SSL security are not enabled.
D. The client was able to establish a network connection with the server, however TLS key negotiation took longer than 60 seconds, indicating that there may be a problem with network performance.
Answer: A

8. Which of the following export options, when specified in /etc/exports, will tell the server to use the NFSv4 Pseudofilesystem?
A. fsid=2
B. fsid=0
C. fsid=3
D. fsid=1
Answer: B

Download Lpi 117-303 Dumps

LPI 302 Mixed Environment Exam

• Exam Number/Code : 117-302
• Exam Name : LPI 302 Mixed Environment Exam
• Questions and Answers : 146 Q&As

Download Pass4sure 117-302 Dumps from the link below
Download CertifyMe 117-302 Dumps from the link below
Download Testking 117-302 Dumps from the link below

Download Lpi 117-302 Dumps

PrepKing.com Lpi 117-302 Sample Questions

Exam : LPI 117-302
Title : LPI 302 Mixed Environment Exam

1. Which of the following are true of CIFS? (Choose TWO correct Answers)
A.Filenames can be in any character set.
B.Filenames can have a maximum length of 127 characters.
C.Unlike SMB, CIFS is not optimized for slow network connections.
D.Opportunistic Locks are supported.
Answer: AD

2. For Samba to be able to work as a PDC, some modifications are needed in its main configuration file. Select the THREE options below that show the required actions for this task.
A.The Samba server has to be a logon server. This can be configured by the domain logons directive.
B.The Samba server needs to have the logon and the account creation scripts, to properly setup the PDC environment.
C.The Samba server must be a Domain Master Browser. To configure this, the domain master directive must be set to yes.
D.The time server = yes directive needs to be configured, so Samba will behave as a WINS server and also a Time server.
E.The security = user directive must be set.
Answer: ACE

3. The command _______ is used on a Samba 3 server to modify the SSID in an existing NT profile file called NTUser.DAT.
Answer: profiles

4. Which command will import an smbpasswd file located in /etc/samba to a TDB data file?
______ i smbpassd:/etc/samba/smbpasswd
Answer: pdbedit

5. What DHCP option can be set on a ISC DHCP server to tell NETBIOS clients that the WINS server has the IP address 19168.1.2?
A.option netbioswinsservers 192.168.1.2;
B.option winsnetbiosservers 192.168.1.2;
C.option winsnameservers 192.168.1.2;
D.option netbiosnameservers 192.168.1.2;
Answer: D

6. Which file contains the information that is retrieved by the following command:
# net getlocalsid SID for domain SERVER is: S152120043211811294720513754763961
A./etc/samba/secret.tdb
B./var/lib/samba/winbind_idmap.tdb
C./var/cache/localsid.tdb
D./var/cache/sid.tdb
Answer: A

7. After installing a network with one Samba server and several clients, users are complaining that they receive an Unable to browse the network error when trying to visit a public share. What is the most likely cause of this?
A.The user entered the wrong username and/or password.
B.The nmbd process is not running on the Samba server.
C.The user hasn’t mapped the share to a local drive letter yet.
D.The Samba server is not configured as a Domain Master Browser.
Answer: B

8. What does the following command below do?
smbclient //server/Reports U func
A.The Samba server administrator is providing access permissions to the Reports share to user func.
B.User func is downloading the content located in the Reports share of Samba server.
C.Computer func is trying to make a connection with a Samba server share, and the command will prompt for the username and password.
D.User func is trying to connect to the Reports share in the Samba server.
Answer: D

Download Lpi 117-302 Dumps

LPI 301 Core Exam

• Exam Number/Code : 117-301
• Exam Name : LPI 301 Core Exam
• Questions and Answers : 130 Q&As

Download Pass4sure 117-301 Dumps from the link below
Download CertifyMe 117-301 Dumps from the link below
Download Testking 117-301 Dumps from the link below

Download Lpi 117-301 Dumps

PrepKing.com Lpi 117-301 Sample Questions

Exam : LPI 117-301
Title : LPI 301 Core Exam

1. What is true of any created custom attribute or object class?
A. It cannot be placed in one of the default distributed schema files.
B. The name must be registered with IANA to avoid conflicts with other custom schemas.
C. It must have a unique OID.
D. It must not contain any numbers.
Answer: C

2. A private OID should be obtained for a company when:
A. that company runs out of public OIDs.
B. the company intends to use LDAP for commercial purposes.
C. the company wants to make their directory available to the public on the World Wide Web.
D. the company plans to create custom schema files for their directory.
Answer: D

3. Which of the following describes correct LDAP service definitions? (Choose THREE correct answers.)
A. LDAP was developed as a lightweight alternative to DAP.
B. LDAPv6 is the latest stable version specified by RFCs.
C. LDAP follows the X.500 directory standard.
D. X.500 directories can run only over TCP/IP.
E. LDAP is optimized for searching information.
Answer: ACE

4. Select the INCORRECT statement regarding the LDIF file format:
A. It must contains a “dn” line (or distinguished name), that indicates where the attributes listed in the following lines of the file must be added.
B. In the file, a blank line separates one entry from another one.
C. If the attribute contains binary data, some specific configurations must be made for this entry.
D. The LDIF file accepts any type of file encoding.
Answer: D

5. What does the LDIF acronym stand for?
A. Lightweight Database Interchange Format
B. LDAP Database Interchange Format
C. LDAP Data Internet File
D. LDAP Data Interchange Format
Answer: D

6. Which statements are true of object classes in an LDAP directory? (Choose TWO correct answers)
A. Auxiliary object classes – when used on their own – provide access to extended schema.
B. An entry cannot have more than one auxiliary object class.
C. An entry cannot have more than one structural object class.
D. Once an entry has been created, its structural object class cannot be changed without re-creating the entry.
E. Abstract object classes are no longer officially support by the LDAP protocol.
Answer: CD

7. When assigned to the ref attribute for ou=people,dc=example,dc=com, which of the following values will create a subordinate knowledge link to slave.example.com?
A. ldap://slave.example.com/ou=people,dc=example,dc=com
B. ldap://slave.example.com?ou=people,dc=example,dc=com
C. ldap://slave.example.com ou=people,dc=example,dc=com
D. ldap://slave.example.com,ou=people,dc=example,dc=com
Answer: A

8. Which of the following is the correct syntax for including a schema file in slapd.conf?
A. include /usr/local/etc/openldap/schema/core.schema
B. allow /usr/local/etc/openldap/schema/core.schema
C. permit /usr/local/etc/openldap/schema/core.schema
D. add /usr/local/etc/openldap/schema/core.schema
Answer: A

Download Lpi 117-301 Dumps

Lpi Level 2 Exam 201

• Exam Number/Code : 117-201
• Exam Name : Lpi Level 2 Exam 201
• Questions and Answers : 118 Q&As

Download Pass4sure 117-201 Dumps from the link below
Download CertifyMe 117-201 Dumps from the link below
Download Testking 117-201 Dumps from the link below

Download Lpi 117-201 Dumps

PrepKing.com Lpi 117-201 Sample Questions

Exam : Lpi 117-201
Title : LPI Level 2 Exam 201

1. If the command arp f is run, which file will be read by default?
A. /etc/hosts
B. /etc/ethers
C. /etc/arp.conf
D. /etc/networks
E. /var/cache/arp
Answer: B

2. A DNS server has the IP address 192.168.0.1. Which TWO of the following need to be done on a client machine to use this DNS server?
A. Add nameserver 192.168.0.1 to /etc/resolv.conf.
B. Run route add nameserver 192.168.0.1.
C. Run ifconfig eth0 nameserver 192.168.0.1.
D. Ensure that the dns service is listed in the hosts entry in the /etc/nsswitch.conf file.
E. Run bind add nameserver 192.168.0.1.
Answer: AD

3. Which single parameter, when passed to nmap, will instruct nmap to perform a fast scan? (Provide only the option)
Answer: -F

4. How can the label root be added to the ext2 filesystem on /dev/sda1? Please enter the command with all parameter(s) and/or option(s) below.
Answer: /sbin/tune2fs -L root /dev/sda1 tune2fs -L root /dev/sda1

5. Performing a DNS lookup with dig results in this answer:
;; QUESTION SECTION:
;5.123.168.192.inaddr.arpa. IN PTR
;; ANSWER SECTION:
5.123.168.192.inaddr.arpa. 600 IN PTR linuserv.example.net.123.168.192.inaddr.arpa.
;; AUTHORITY SECTION:
123.168.192.inaddr.arpa. 600 IN NS linuserv.example.net.
;; ADDITIONAL SECTION:
linuserv.example.net. 600 IN A 192.168.123.5
What might be wrong in the zone definition?
A. Nothing. All seems to be good.
B. There s no “.” after linuserv.example.net in the PTR record in the forward lookup zone file.
C. There s no “.” after linuserv in the PTR record in the forward lookup zone file.
D. There s no “.” after linuserv.example.net in the PTR record in the reverse lookup zone file.
E. The “.” in the NS definition in reverse lookup zone has to be removed.
Answer: D

Download Lpi 117-201 Dumps

Lpi Level 2 Exam 202

• Exam Number/Code : 117-202
• Exam Name : Lpi Level 2 Exam 202
• Questions and Answers : 110 Q&As

Download Pass4sure 117-202 Dumps from the link below
Download CertifyMe 117-202 Dumps from the link below
Download Testking 117-202 Dumps from the link below

Download Lpi 117-202 Dumps

PrepKing.com Lpi 117-202 Sample Questions

Exam : LPI 117-202
Title : LPI Level 2 Exam 202

1. To allow X connections to be forwarded from or through an SSH server, what line must exist in the sshd configuration file?
Answer: X11Forwarding yes

2. Which of the following organisations track and report on security related flaws in computer technology? (Please select TWO answers)
A. Bugtraq
B. CERT
C. CSIS
D. Freshmeat
E. Kernel.org
Answer: AB

3. A securityconscious administrator would change which TWO of the following lines found in an SSH configuration file?
A. Protocol 2,1
B. PermitEmptyPasswords no
C. Port 22
D. PermitRootLogin yes
E. IgnoreRhosts yes
Answer: AD

4. A GRUB boot loader installed in the MBR was accidentally overwritten. After booting with a rescue CDROM, how can the lost GRUB first stage loader be recovered?
A. Use cp to restore a previous backup of the MBR.
B. Install LILO since there is no easy way to recover GRUB.
C. Running mformat will create a new MBR and fix GRUB using info from grub.conf.
D. Run grubinstall after verifying that grub.conf is correct.
E. Run fdisk mbr /dev/hda assuming that the boot hardisk is /dev/hda.
Answer: D

5. The internal network (192.168.1.0192.168.1.255) needs to be able to relay email through the site’s sendmail server. What line must be added to /etc/mail/access to allow this?
A. 192.168.1.0/24 RELAY
B. 192.168.1 RELAY
C. 192.168.1.0/24 OK
D. 192.168.1 OK
Answer: B

6. What happens when the Linux kernel can’t mount the root filesystem when booting?
A. An error message is shown, showing which device couldn’t be mounted or informing that init couldn’t be found.
B. An error message is shown and the system reboots after a keypress.
C. An error message is shown and the system boots in maintainence mode.
D. An error message is shown and the administrator is asked to specify a valid root filesystem to continue the boot process.
E. An error message is shown, stating that the corresponding kernel module couldn’t be loaded.
Answer: A

7. Journalling doesn’t appear to be working on an ext3 filesystem. When booting, the following line appears:
VFS: Mounted root (ext2 filesystem) readonly.
What could be causing the problem?
A. An old version of e2fsprogs is installed.
B. The kernel does not contain ext3 support.
C. The filesystem is specified as ext2 in /etc/fstab.
D. The system was not shut down cleanly.
Answer: B

8. The syntax of the procmail configuration file is?
A. :0[flags][:[lockfile]]
[* condition]
action
B. [* condition]
action
:0[flags][:[lockfile]]
C. :0[flags][:[lockfile]]
[* condition] action
D. :0:[flags][:[lockfile]]:[* condition]
action
E. :0[flags][:[lockfile]]:[* condition]:action
Answer: A

Download Lpi 117-202 Dumps

Lpi Level 1 Exam 101(with dpkg)

• Exam Number/Code : 117-151
• Exam Name : Lpi Level 1 Exam 101(with dpkg)
• Questions and Answers : 139 Q&As

Download Pass4sure 117-151 Dumps from the link below
Download CertifyMe 117-151 Dumps from the link below
Download Testking 117-151 Dumps from the link below

Download Lpi 117-151 Dumps

Ubuntu Level 1 Exam

• Exam Number/Code : 117-199
• Exam Name : Ubuntu Level 1 Exam
• Questions and Answers : 94 Q&As

Download Pass4sure 117-199 Dumps from the link below
Download CertifyMe 117-199 Dumps from the link below
Download Testking 117-199 Dumps from the link below

Download Lpi 117-199 Dumps

PrepKing.com Lpi 117-199 Sample Questions

Exam : LPI 117-199
Title : Ubuntu Level 1 Exam

1. What is true of the gconfdaemon
A. It provides back end storage for the gconf database.
B. It notifies all applications when a preference value changes.
C. It is started at boot time.
D. It constantly polls all Gnome applications for changed preference values.
Answer: B

2. Which group does a user have to be a member of in order to access the modem?
Answer: dialout

3. How do you see which packages a package depends on (e.g. gimp )
A. apt cache show deps gimp
B. aptitude show gimp
C. apt show all gimp
D. dpkg show gimp
Answer: B

4. Which list shows all official Ubuntu distributions and derivatives?
A. Ubuntu, Xubuntu, Zubuntu, Gubuntu, nUbuntu
B. Ubuntu, Kubuntu, Zubuntu, Edubuntu, nUbuntu
C. Ubuntu, Kubuntu, Edubuntu, Xubuntu, ImpiLinux
D. Ubuntu, Gubuntu, Zubuntu, Xubuntu, ImpiLinux
Answer: C

5. Which group does a user have to be a member of in order to access removable storage media?
Answer: plugdev

6. You want all users on a machine to be able to administer printers. What line in your /etc/sudoerswould achieve this
A. ALL ALL = /usr/bin/gnome cups manager
B. /usr/bin/gnome cups manager, ALL, ALL, users
C. /usr/bin/gnome cups manager (ALL) ALL,
users
D. ALL (ALL) = /usr/bin/gnome cups manager
Answer: A

7. Which file must be edited to tune DMA on individual CD ROM drives?
Answer: /etc/hdparm.conf /etc/default/hdparm

8. What GUI tool is used to create new users? (Supply only the name of the executable file without a path)
Answer: users-admin

Download Lpi 117-199 Dumps

LPI Level 1 Exam 101

• Exam Number/Code : 117-101
• Exam Name : LPI Level 1 Exam 101
• Questions and Answers : 117 Q&As

Download Pass4sure 117-101 Dumps from the link below
Download CertifyMe 117-101 Dumps from the link below
Download Testking 117-101 Dumps from the link below

Download Lpi 117-101 Dumps

PrepKing.com Lpi 117-101 Sample Questions

Exam : LPI 117-101
Title : LPI Level 1 Exam 101(with rpm)

1. Which of the following commands will change all CR LF pairs in an imported text file, userlist.txt, to Linux standard LF characters and store it as newlist.txt
A. tr ‘rn’ ” < userlist.txt > newlist.txt
B. tr c ‘nr’ ” < newlist.txt > userlist.txt
C. tr d ‘r’ < userlist.txt > newlist.txt
D. tr ‘r’ ‘n’ userlist.txt newlist.txt
E. tr s ‘^M’ ‘^J’ userlist.txt newlist.txt
Answer: C

2. When reading man pages, a lot of extra characters are shown on screen. Which of the following commands can help to deal with this problem?
A. col
B. grep
C. more
D. pg
E. row
Answer: A

3. What command line redirection characters instruct the shell to read from the current input source until a specific word, on a separate line and without and trailing spaces, is reached?
A. <<
B. <|
C. !<
D. &<
Answer: A

4. How can you turn off the group quota in /pub
A. quotaoff /pub
B. quotaoff gv /pub
C. quotadown /pub
D. rm /pub/quota.group
Answer: B

5. What command will print a list of usernames (first column) and their corresponding user id (uid, third column) from /etc/passwd
A. cut d: f1,3 /etc/passwd
B. chop c 1,3 /etc/passwd
C. tac 1 3 /etc/passwd
D. fmt u /etc/passwd
Answer: A

6. The ___________ partition is used for virtual memory.
Answer: swap

7. User Joseph has successfully extracted and compiled a program from source code. Installing the binaries produces errors. What is the most likely reason?
A. The source code was compiled for a different CPU.
B. The permissions set in the /usr/bin directory are wrong.
C. The binaries require root privileges to be installed.
D. The wrong prefix was used during configuration of the source code.
Answer: C

8. Where can lilo place boot information?
A. The boot ROM
B. The boot RAM
C. The /boot partition
D. The MBR on a hard drive
Answer: D

Download Lpi 117-101 Dumps

Lpi Level 1 Exam 102

• Exam Number/Code : 117-102
• Exam Name : Lpi Level 1 Exam 102
• Questions and Answers : 121 Q&As

Download Pass4sure 117-102 Dumps from the link below
Download CertifyMe 117-102 Dumps from the link below
Download Testking 117-102 Dumps from the link below

Download Lpi 117-102 Dumps

PrepKing.com Lpi 117-102 Sample Questions

Exam : LPI 117-102
Title : lp1 level 1 exam 102

1. The hosts.allow file is used by
A. tcpd
B. inetd
C. fingerd
D. mountd
E. xinetd
Answer: A

2. The user bob complains that he cannot access his email. In which directory would you look to see if there is any delivered email for him?
A. /var/spool/mail
B. /var/mail/mqueue
C. /var/spool/mqueue
D. /home/bob/.mail
Answer: A

3. You are a junior administrator of a high-traffic production web server. Which of the following commands would you run to restart the Apache web service without aborting existing connections?
A. apachectl reload
B. apachectl restart
C. apachectl -k stop; apachectl start
D. apachectl graceful
E. /etc/init.d/httpd reload
Answer: D

4. Your senior system administrator asked you to edit the /etc/inetd.conf file in order to disable the time service. After doing so, what would be the next thing to do?
A. Reboot the machine.
B. Restart the inetd.
C. Find the PID of inetd and kill it with kill -15.
D. Find the PID of inetd and send it a SIGHUP.
Answer: D

5. Which configuration option can you use to prevent the root user from logging directly onto a machine using ssh?
A. NoRootLogin
B. PermitRootLogin No
C. NoRootLogin Yes
D. RootLogin = No
E. ProhibitRootLogin No
Answer: B

6. You want to add an alias for an existing DNS record. What type of DNS record could you use?
A. CNAME
B. MX
C. SOA
D. NS
Answer: A

7. You have a file /etc/resolv.conf, but the computer does not use the configured DNS servers to look up host names. What is most likely the problem?
A. The hosts entry in your /etc/nsswitch.conf does not list dns.
B. You do not have a /etc/named.conf file.
C. The localhost hostname is not properly configured in /etc/hosts.
D. The named daemon is not running on your computer.
Answer: A

8. Which of the following commands is used to test if the syntax of Apache’s configuration files are correct?
A. apacheconftest -a
B. apachectl configtest
C. ab -ct
D. httest -c
Answer: B

Download Lpi 117-102 Dumps