Are u looking to Pass your Certification Exam? Then you have came to the right place here you will find real exam questions of any exam taken from the testing center and aslo links to sites that sell them. So now passing your certification exam has become much easier than before all you have to do is memorize the questions you will see exactly the same questions in the real exam. In today world time is money so by this not only you save time plus you aslo save yourself the hassale of failing
Download Pass4sure MB7-849 Dumps from the link below
Download CertifyMe MB7-849 Dumps from the link below
Download Testking MB7-849 Dumps from the link below
Download Pass4sure MB7-848 Dumps from the link below
Download CertifyMe MB7-848 Dumps from the link below
Download Testking MB7-848 Dumps from the link below
Download Pass4sure MB7-846 Dumps from the link below
Download CertifyMe MB7-846 Dumps from the link below
Download Testking MB7-846 Dumps from the link below
Download Pass4sure MB5-845 Dumps from the link below
Download CertifyMe MB5-845 Dumps from the link below
Download Testking MB5-845 Dumps from the link below
PrepKing.com Microsoft MB5-845 Sample Questions
Download Pass4sure MB7-843 Dumps from the link below
Download CertifyMe MB7-843 Dumps from the link below
Download Testking MB7-843 Dumps from the link below
PrepKing.com Microsoft MB7-843 Sample Questions
Download Pass4sure MB7-842 Dumps from the link below
Download CertifyMe MB7-842 Dumps from the link below
Download Testking MB7-842 Dumps from the link below
PrepKing.com Microsoft MB7-842 Sample Questions
Download Pass4sure 70-542VB Dumps from the link below
Download CertifyMe 70-542VB Dumps from the link below
Download Testking 70-542VB Dumps from the link below
PrepKing.com Microsoft 70-542VB Sample Questions
Download Pass4sure 70-237 Dumps from the link below
Download CertifyMe 70-237 Dumps from the link below
Download Testking 70-237 Dumps from the link below
PrepKing.com Microsoft 70-237 Sample Questions
Exam : Microsoft 70-237
Title : Designing Messaging Solutions with MS Exchange Serv
1. You are the messaging engineer for your company.
The network contains two Microsoft Exchange Server 2003 servers named Server1 and Server2. Server1 is a
back-end server. Server2 is a front-end server. You purchase a new server named Server3 that has the same
hardware as Server1 and Server2.
All server hardware supports both the 32-bit and 64-bit versions of Microsoft Windows Server 2003.
You need to recommend a strategy to transition from Exchange Server 2003 to Exchange Server 2007. Your
strategy must meet the following requirements:
Minimize downtime.
Configure the solution to be supported by Microsoft for production environments.
Configure one server to provide Exchange Web Services and message delivery and a different server to
manage Mailbox databases.
What should you recommend?
A. On Server3, install the 32-bit edition of Windows Server 2003. Install the 32-bit edition of the Exchange Server
2007 Client Access server role, Hub Transport server role, and Mailbox server role. Change the MX records and
Web services URL to point to Server3. Move all mailboxes to Server3.
B. On Server3, install Windows Server 2003 x64 Edition. Install the 64-bit edition of the Exchange Server 2007
Client Access server role, Hub Transport server role, and Mailbox server role. Change the MX records and Web
services URL to point to Server3. Move all mailboxes to Server3.
C. On Server2, remove the current operating system and install Windows Server 2003 x64 Edition. Install the
64-bit edition of the Exchange Server 2007 Hub Transport server role and Client Access server role. On Server1,
export all mailboxes to .pst files. On Server1, import the mailboxes to the server from the .pst files.
D. On Server3, install Windows Server 2003 x64 Edition. Install the 64-bit edition of the Exchange Server 2007
Hub Transport server role and Client Access server role. Change the MX records and Web services URL to point
to Server3. On Server2, remove the current operating system and install the Windows Server 2003 x64 Edition.
Install the Mailbox server role from the 64-bit edition of Exchange Server 2007. Move all mailboxes to Server2.
Answer: D
2. You are the messaging engineer for your company.
Your company is transitioning from Microsoft Exchange Server 2003 to Exchange Server 2007. 3,000 mailboxes
have been moved to the Exchange Server 2007 Mailbox servers. 3,000 mailboxes are still hosted on the Exchange
PrepKing.com
Server 2003 servers.
Your company recently registered an additional domain name fourthcoffee.com. You have updated the DNS
servers with the appropriate records.
You need to ensure that:
All users are configured with a fourthcoffee.com e-mail address.
The Exchange organization accepts messages for the fourthcoffee.com domain.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From the Exchange System Manager, create a recipient policy for the fourthcoffee.com domain. Apply the
policy to all Exchange recipients.
B. From the Exchange System Manager, create a custom address list. Specify the * LDAP filter to the address list.
C. From the Exchange System Manager, create a new Internet Message Formats domain for the fourthcoffee.com
domain.
D. From the Exchange Management Console, create a new accepted domain for fourthcoffee.com.
E. From the Exchange Management Console, create a new Receive connector. Enable the Exchange Server
authentication mechanism for the new Receive connector.
Answer: AD
3. You are the messaging engineer for your company. Your company has a single Microsoft Exchange Server 2003
server that supports mailboxes and public folders. The Exchange Server 2003 server hosts mailboxes for each
conference room in your company. Each conference room mailbox holds the schedule for that particular
conference room. You install a new Exchange Server 2007 server that hosts the Mailbox server role. You plan to
move the conference room mailboxes from Exchange Server 2003 to Exchange Server 2007. You need to ensure
that Exchange Server 2007 conference room mailboxes are configured as room resources. What should you do?
A. Ensure that the conference room mailboxes are configured as resources of type room.
B. Ensure that the conference room mailboxes are configured as resources of type linked.
C. Use the Exchange Management Shell to add the text ConferenceRoom to the resource property schema.
D. Use the Exchange Management Console to set the Custom Attributes 10 and 11 for each conference room
mailbox. Enter the text resource in Custom Attribute 11. Enter the text room in Custom Attribute 12.
Answer: A
4. You are the messaging engineer for your company. Your company has a main office and two branch offices.
An Active Directory site exists for each office. Each site contains two Microsoft Exchange Server 2003 servers
and one routing group. A routing group connector connects each routing group. Each routing group connector uses
both Exchange servers as local bridgehead servers.
You plan to deploy Exchange Server 2007. Each office will have two Exchange Server 2007 Hub Transport
servers. In each office, the Exchange Server 2007 servers will be on the same network segment as the Exchange
Server 2003 servers. Exchange Server 2003 mailboxes will be moved to Exchange Server 2007 Mailbox servers
that reside in the same office. Mailboxes will be moved during a six week period.
PrepKing.com
You need to recommend a message routing solution that:
Uses the local network to deliver e-mail messages from users in the local office even if the mailbox has
been moved to Exchange Server 2007.
Does not interfere with how Exchange Server 2003 delivers e-mail to other Exchange Server 2003
servers.
What should you recommend?
A. Delete the existing routing group connectors. In each routing group, create an SMTP connector that uses the
Exchange Server 2007 Hub Transport servers as smart hosts.
B. For each Exchange Server 2003 bridgehead server, add a smart host to the SMTP virtual server. Configure the
smart host to deliver e-mail to the Exchange Server 2007 Hub Transport servers.
C. Create routing group connectors between each of the existing routing groups and the routing group named
Exchange Routing Group (DWBGZMFD01QNBJR). For each routing group connector, configure the local
Exchange Server 2007 Hub Transport servers as the remote bridgeheads.
D. For each Exchange Server 2003 routing group, create a Send connector. Configure the Send connector to
deliver e-mail to the Exchange Server 2003 bridgehead servers. Define an Exchange Server 2003 SMTP
Connector in each routing group that delivers e-mail to the Exchange Server 2007 Receive connectors on each
Hub Transport server.
Answer: C
5. You are the messaging engineer for your company. The company network contains an Active Directory forest
that contains three domains. Each domain contains at least one Microsoft Exchange Server 2003 server. All
mail-enabled groups are configured as global distribution groups. You plan to transition from Exchange Server
2003 to Exchange Server 2007. You need to recommend a solution that ensures that all mail-enabled groups can
be expanded from any Exchange Server 2003 server or any Exchange Server 2007 server. What should you
recommend?
A. Convert all global distribution groups to global security groups.
B. Convert all global distribution groups to universal distribution groups.
C. Configure all global distribution groups to require that senders are authenticated.
D. Configure all global distribution groups to send delivery reports to the message originator.
Answer: B
PrepKing.com
6. You are the messaging engineer for your company. The company has one main office and 100 branch offices.
An Active Directory site exists for each office. The company has a Microsoft Exchange Server 2003 messaging
system. Each office contains one Exchange server. A routing group is configured for each office. You plan to
transition the companys messaging system to Exchange Server 2007. You need to design a transition plan that
allows both versions of Exchange to coexist. Your plan must also minimize the number of servers deployed in
your Exchange organization. What should you recommend?
A. Install an Exchange Server 2007 Mailbox server in all offices. Move all mailboxes and replicate all public
folders from the Exchange Server 2003 server to the new Mailbox server. Decommission all Exchange Server
2003 servers.
B. Install an Exchange Server 2007 Mailbox server in the main office. Move all mailboxes and replicate all public
folders from the Exchange Server 2003 servers to the new Mailbox server. Decommission all Exchange Server
2003 servers.
C. Install an Exchange Server 2007 Mailbox server, a Client Access server, and a Hub Transport server in all
offices. Move all mailboxes and replicate all public folders from the Exchange Server 2003 server to the new
Mailbox server. Decommission all Exchange Server 2003 servers.
D. Install an Exchange Server 2007 Mailbox server, a Client Access server, and a Hub Transport server in the
main office. Move all mailboxes and replicate all public folders from the Exchange Server 2003 server to the new
Mailbox server. Decommission all Exchange Server 2003 servers.
Answer: D
7. You are the messaging engineer for your company. Your company has migrated from Microsoft Exchange 5.5
Server to Microsoft Exchange Server 2003. One Exchange 5.5 Server remains on the network. Your company
plans to transition to Exchange Server 2007 and expects a period of coexistence with previous versions of
Exchange Server. You need to prepare the Exchange organization for the installation of Exchange Server 2007.
What should you do? (Each correct answer presents part of the solution. Choose two.)
A. On a domain controller, run setup.exe /PrepareLegacyExchangePermissions and setup.exe /PrepareAD from
the Exchange Server 2007 source files.
B. On an Exchange Server 2003 server, run setup.exe /roles:Mailbox /LegacyRoutingServer from the Exchange
Server 2007 source files.
PrepKing.com
C. Decommission the Exchange 5.5 server from the network and remove all Active Directory connectors. Upgrade
the Exchange organization to native mode.
D. On the Exchange 5.5 server, run the installation program for Exchange Server 2007.
E. Modify the Recipient Update Service for the Exchange organization to point to a server that will be installed
with Exchange Server 2007 server.
Answer: AC
8. You are the messaging engineer for your company. The company has a main office and two branch offices.
The network contains a single Active Directory domain. An Active Directory site exists for each office. Each site
has a Microsoft Exchange Server 2003 server. Each Exchange server hosts the mailboxes and public folders for
users in that office. You plan to deploy one Exchange Server 2007 server in each site. Each Exchange Server 2007
server will host the Mailbox server role, the Client Access server role, the Hub Transport server role, and one
mailbox database and a public folder database. All users will use Microsoft Office Outlook 2003. You need to
recommend a solution that allows Outlook 2003 users to download the offline address book from an Exchange
server in their local site. What should you recommend?
A. For each Exchange Server 2007 server, create replicas of the offline address book public folders.
B. For each Exchange Server 2007 server, schedule the Update-OfflineAddressBook cmdlet to run once a day.
C. On each Exchange Server 2007 server, create an offline address book distribution point and configure
Web-based distribution.
D. For each Exchange Server 2007 server, copy the OAB files to a local share. Redirect all client computers to
that share.
Answer: A
9. You are the messaging engineer for your company. Your company has a Microsoft Exchange Server 2003
messaging system. Your company has an application server named Server1. Server1 sends SMTP administrative
alerts through an unauthenticated relay on an Exchange SMTP virtual server. You plan to deploy Exchange Server
2007 Hub Transport servers. You plan to remove all Exchange Server 2003 servers. You need to ensure that
Server1 can send SMTP alerts by using an unauthenticated relay on an Exchange Server 2007 Hub Transport
server. Which two actions should you perform on the Hub Transport servers? (Each correct answer presents part
of the solution. Choose two.)
PrepKing.com
A. Create a new Receive connector. Configure the Receive connector to use a remote IP address range that
includes the IP address of Server1.
B. Create a new Send connector. Configure an address space that includes only the local SMTP domain.
C. Create a new Send connector. Configure an * address space.
D. Add the Exchange Users permission group and the Exchange Server authentication mechanism.
E. Add the Exchange Servers permission group and the Externally Secured authentication mechanism.
Answer: AE
10. You are the messaging engineer for your company. Your network consists of a Microsoft Exchange Server
2003 organization that contains 20 servers. Users connect to their Exchange mailboxes through front-end servers
by using Outlook Web Access and Outlook Anywhere. You plan to transition from Exchange Server 2003 to
Exchange Server 2007. You need to identify the order in which you will deploy Exchange Server 2007 servers.
During the transition, your solution should allow users to access the messages that are stored in their mailboxes.
What should you do?
A. Install the Client Access server role, then the Hub Transport server role, and then the Mailbox server role.
Move all mailboxes to the Mailbox server.
B. Install the Mailbox server role and the Hub Transport server role concurrently. Move all mailboxes to the
Mailbox servers, and then install the Client Access server role.
C. Install the Mailbox server role and the Edge Transport server roles concurrently. Move all mailboxes to the
Mailbox server, and then install the Client Access server role.
D. Install the Edge Transport server role, and then install the Mailbox server role and the Hub Transport server
roles concurrently. Move all mailboxes to the Mailbox server and then install the Client Access server role.
Answer: A
11. You are the messaging engineer for your company. Your messaging system has both Microsoft Exchange
Server 2003 servers and Exchange Server 2007 servers. You plan to enable message tracking on all Exchange
servers. You need to instruct the administrators which tools to use to review the message tracking information.
Which tools should you instruct the administrators to use? (Each correct answer presents part of the solution.
Choose two)
A. The Exchange Server 2003 management tools.
PrepKing.com
B. The Exchange Server 2007 management tools.
C. The Log Parser Resource Kit tool.
D. The Winroute and MSGanalyzer tools.
Answer: AB
12. You are the messaging engineer for your company. Your network includes an Active Directory domain,
Microsoft Windows Rights Management Services, and an Enterprise Certificate Authority server. All mailboxes
are located on a single Exchange Server 2007 server. All clients use Microsoft Office Outlook 2007. You need to
recommend security changes so that e-mail messages that are sent to recipients outside of the company can be
signed using S/MIME digital signatures. What should you recommend?
A. Issue x.509 certificates to all users.
B. Issue x.509 certificates to all client computers.
C. Install the Windows Rights Management client on all client computers.
D. Create a transport rule that appends a disclaimer to all outbound messages and creates a message header called
X- Smime for all outbound messages.
Answer: A
13. You are the messaging engineer for your company. The company has an Exchange Server 2007 messaging
system. The network contains two Exchange Server 2007 servers named Server1 and Server2. Server1 hosts the
Mailbox server role, the Hub Transport server role, and the Client Access server role. Server1 is located on the
internal network. Server2 hosts the Edge Transport server role. Server2 is located in the perimeter network. Edge
synchronization is configured between Server1 and Server2. You need to ensure that Server1 does not receive
e-mail messages that are sent to e-mail addresses that do not exist in the organizations address book. What should
you recommend?
A. On Server2, enable sender filtering.
B. On Server2, enable recipient filtering.
C. On Server1, install the anti-spam agents and enable sender filtering.
D. On Server1, install the anti-spam agents and enable recipient filtering.
Answer: B
Download Pass4sure 70-236 Dumps from the link below
Download CertifyMe 70-236 Dumps from the link below
Download Testking 70-236 Dumps from the link below
PrepKing.com Microsoft 70-236 Sample Questions
Exam : Microsoft 70-236
Title : Configuring Exchenge Server 2007
1. Your companys Active Directory structure contains a root domain in site A and a single child domain in site B.
You are preparing to install Exchange Server 2007 in the child domain.
In the root domain, you run the Setup /PrepareAD command.
You need to ensure that you can install Exchange in the child domain.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. In the child domain, run the Setup /DomainPrep command.
B. In the child domain, run the Setup /PrepareDomain command.
C. In the root domain, run the Setup /ForestPrep command.
D. In the root domain, run the Setup /PrepareDomain command.
E. In the root domain, run the Setup /PrepareAllDomains command.
Answer: B AND E
2. You need to configure the minimum permissions necessary for a user to be able to configure mailbox databases
on an Exchange Server 2007 computer.
What should you do?
A. Delegate Exchange Administrator privileges to the user account at the organization level.
B. Add the user account to the Exchange Server Administrators role.
C. Add the user account to the Exchange Recipient Administrators role.
D. Add the user account to the Exchange Organization Administrators role.
Answer: B
3. You need to ensure that an administrator named Marc is able to create a Send connector on a Hub Transport
server. You need to achieve this goal by assigning only the minimum permissions necessary.
What should you do?
A. Run the Add-ExchangeAdministrator Role ServerAdmin Identity Marc cmdlet.
B. Run the Add-ExchangeAdministrator Role OrgAdmin Identity Marc cmdlet.
C. Delegate Exchange Full Administrator privileges to Marc at the organization level.
D. Add Marc to the Domain Admins group.
Answer: B
PrepKing.com
4. Your company s Active Directory forest consists of a single site that has a root domain and one child domain.
You need to prepare Active Directory and the domains prior to installing the first Exchange Server 2007 computer.
Which two commands should you run? (Each correct answer presents part of the solution. Choose two.)
A. Setup /ForestPrep
B. Setup /PrepareAD
C. Setup /DomainPrep
D. Setup /PrepareAllDomains
Answer: B AND D
5. You need to configure the minimum permissions necessary for a new administrator so that she can prepare
Active Directory for Exchange Server 2007.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the new administrator as an Exchange Full Administrator at the organization level.
B. Add the new administrators user account to the Exchange Enterprise Servers group.
C. Add the new administrators user account to the Domain Admins group.
D. Add the new administrators user account to the Enterprise Admins group.
E. Add the new administrators user account to the Schema Admins group.
Answer: D AND E
6. You are preparing to transition from Exchange 2000 Server to Exchange Server 2007.
The environment consists of a single Windows 2000 native mode Active Directory domain and an Exchange 2000
organization running in mixed mode. The schema master, domain naming master, and PDC emulator all run on a
Microsoft Windows 2000 Server domain controller.
You need to prepare the environment for Exchange 2007.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Move the PDC emulator role to a domain controller that runs Windows Server 2003 with Service Pack 1.
B. Move the schema master role to a domain controller that runs Windows Server 2003 with Service Pack 1.
C. Move the domain naming master role to a domain controller that runs Windows Server 2003 with Service Pack
1.
PrepKing.com
D. Convert the Exchange 2000 organization to native mode.
Answer: B AND D
7. You are preparing to install the Mailbox server role on a new Exchange Server 2007 computer.
You need to optimize read and write performance on this server.
You also need to provide redundancy on this server.
On which type of array should you place the mailbox database?
A. RAID 1 containing the operating system partition
B. RAID 1 dedicated
C. RAID 0 dedicated
D. RAID 10 dedicated
Answer: D
8. Your companys e-mail domain is contoso.com. Three Edge Transport servers in your Exchange Server 2007
organization will accept Internet mail. The servers are named Exch1, Exch2, and Exch3.
You need to load balance Exch2 and Exch3, and you need to configure Exch1 as a backup server.
Which three MX records should you specify? (Each correct answer presents part of the solution. Choose three.)
A. contoso.com MX preference = 10, mail exchanger = Exch1.contoso.com
B. contoso.com MX preference = 10, mail exchanger = Exch3.contoso.com
C. contoso.com MX preference = 10, mail exchanger = Exch2.contoso.com
D. contoso.com MX preference = 20, mail exchanger = Exch2.contoso.com
E. contoso.com MX preference = 20, mail exchanger = Exch1.contoso.com
F. contoso.com MX preference = 20, mail exchanger = Exch3.contoso.com
Answer: B AND C AND E
9. A custom Security Configuration Wizard (SCW) policy is applied to an Exchange Server 2007 Edge Transport
server named Exch1. You want to apply this policy to a new Edge Transport server named Exch2.
You install SCW on Exch2. You copy the existing SCW policy to Exch2 as C:\ExchangeSCWPolicy.xml.
You need to apply the custom policy to Exch2.
What should you do?
PrepKing.com
A. First, use SCW to apply the C:\ExchangeSCWPolicy.xml policy.
Then, run the Scwcmd register /kbname:”Ex2007KB” /kbfile:”%programfiles%\Microsoft\Exchange
Server\scripts\Exchange2007Edge.xml” command.
B. First, use SCW to apply the C:\ExchangeSCWPolicy.xml policy.
Then, run the Scwcmd register /kbname:”Ex2007EdgeKB” /kbfile:”%programfiles%\Microsoft\Exchange
Server\scripts\Exchange2007.xml” command.
C. First, run the Sc wcmd register /kbname:” Ex2007KB ” / kbfile:” %programfiles %\Microsoft\Exchange
Server\scripts\Exchange2007 Edge .xml ” command.
Then, use SCW to apply the C:\ExchangeSCWPolicy.xml policy.
D. First, r un the Scwcmd register /kbname:”Ex2007EdgeKB” / kbfile:” %programfiles %\Mic rosoft\Exchange
Server\scripts\Exchange2007 .xml ” command.
Then, use SCW to apply the C:\ExchangeSCWPolicy.xml policy.
Answer: C
10. You need to install the necessary components prior to installing Exchange Server 2007 on a new server.
Which three components should you install? (Each correct answer presents part of the solution. Choose three.)
A. Windows PowerShell 1.0
B. Network News Transfer Protocol (NNTP)
C. Simple Mail Transfer Protocol (SMTP)
D. Microsoft Management Console (MMC) 3.0
E. Microsoft .NET Framework 1.1
F. Microsoft .NET Framework 2.0
Answer: A AND D AND F
11. You need to identify the Exchange Server 2007 server role that must be installed on a stand-alone server.
Which server role should you identify?
A. Client Access
B. Edge Transport
C. Hub Transport
D. Mailbox
PrepKing.com
Answer: B
12. You plan to install the Hub Transport server role on an Exchange Server 2007 Mailbox server named Exch1.
The installation must occur during nonbusiness hours.
You verify that Exchange Server 2007 is installed on Exch1 at C:\Program Files\Microsoft\Exchange Server. A
copy of the Exchange installation files is located in the C:\InstallFiles custom directory. You create a new file
named install.bat in the root directory of drive C.
You need to schedule the installation of the Hub Transport server role on Exch1.
What should you do?
A. In the install.bat file, type the following command:
“C :\InstallFiles\Setup” /mode Install /roles HubTransport
Create a scheduled task to run the executable.
B. In the install.bat file, type the following command:
“C: \Program Files\Microsoft\Exchange Server\Setup” /mode Install /roles HubTransport
Create a scheduled task to run the executable.
C. In the install.bat file, type the following command:
“C :\InstallFiles\Setup” /mode RecoverServer /roles HubTransport
Create a scheduled task to run the executable.
D. In the install.bat file, type the following command:
“C :\Program Files\Microsoft\Exchange Server\Setup” /mode RecoverServer /roles HubTransport
Create a scheduled task to run the executable.
Answer: B
13. You are installing a two-node Single Copy Cluster (SCC) Mailbox server. You name the two network adapters
Private and Public.
You need to configure the TCP/IP binding order for the cluster servers.
What should you do?
A. In the Cluster Administrator console, open the properties of the cluster. On the Network Priority tab, move the
Private network to the top.
B. In the Cluster Administrator console, open the properties of the cluster. On the Network Priority tab, move the
PrepKing.com
Public network to the top.
C. In Control Panel, open Network Connections. On the Advanced menu, click Advanced Settings. On the
Adapters and Bindings tab, move the Private connection to the top.
D. In Control Panel, open Network Connections. On the Advanced menu, click Advanced Settings. On the
Adapters and Bindings tab, move the Public connection to the top.
Answer: D
14. Your Exchange Server 2007 organization contains a Client Access server and a Hub Transport server.
The Client Access server fails.
You need to add the Client Access server role to the existing Hub Transport server.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Use the Add or Remove Programs applet in Control Panel.
B. Run the exsetup /mode:recoverserver /roles:ClientAccess command.
C. Run the exsetup /mode:install /roles:ClientAccess command.
D. Run the exsetup /mode:install /roles:ClientAccess,HubTransport command.
E. Use Exchange System Manager, and configure the server as a front-end server.
Answer: A AND C
15. You are creating a cluster continuous replication (CCR) cluster.
You create a failover cluster, and you install the Mailbox server role named ExchMB1 on the active node.
You need to install the Mailbox server role on the passive node.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Run the Enable-StorageGroupCopy -Identity ExchMB1\SG1 command.
B. Run the Setup /roles:Mailbox command.
C. Run the Setup /newcms /CMSname:ExchMB1 command.
D. Select the Passive Clustered Mailbox Role check box in the Exchange Server 2007 Setup wizard.
E. Select the Mailbox Role check box in the Exchange Server 2007 Setup wizard.
Answer: B AND D
16. You install an Exchange Server 2007 Edge Transport server role and Hub Transport server role. The server that
has the Hub Transport server role is located in an Active Directory site named Chicago.
PrepKing.com
You need to synchronize your companys Active Directory information to the server that has the Edge Transport
server role.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Run the New- EdgeSubscription – FileName ” c:\EdgeServerSubscription.xml ” cmdlet on the server that has
the Edge Transport server role.
B. Run the New-EdgeSubscription -FileName “c:\EdgeServerSubscription.xml” site “Chicago” cmdlet on the
server that has the Hub Transport server role.
C. Run the ADAMSync command on the server that has the Edge Transport server role.
D. Run the ExportEdgeConfig -CloneConfigData “C:\CloneConfigData.xml” command on the server that has the
Edge Transport server role.
E. Run the Im portEdgeConfig – CloneConfigData ” C:\CloneConfigData.xml ” command on the server that has
the Edge Transport server role.
Answer: A AND B
17. Your company has four Active Directory sites. A Hub Transport server role and a Mailbox server role are
installed at each site. The network is configured as shown in the following diagram.
You need to ensure that messages between the Chicago and Seattle sites are routed through ExchHub2 in the
Dallas site.
Which cmdlet should you run?
A. Set- AdSiteLink -Identity SEA-DAL – ExchangeCost 5
B. Set- AdSiteLink -Identity SEA-DAL – ExchangeCost 25
C. Set- AdSite – Identity Dallas – HubSiteEnabled $ false
D. Set- AdSite – Identity Dallas – HubSiteEnabled $true
Answer: D
18. You are performing a new installation of Exchange Server 2007. You complete the installation of a Hub
Transport server named ExchHub1 and an Edge Transport server named ExchEdge1.
You need to configure the e-mail routing to meet the following requirements.
Configure ExchHub1 to route Internet e-mail to ExchEdge1.
Configure ExchEdge1 to route e-mail between your Exchange organization and the Internet.
Which two sets of actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. On ExchHub1, create a new Send connector named Hub ? Edge.
Add the * domain as an address space and specify to use DNS to route e ? mail automatically.
Add ExchHub1 as a source server.
B. On ExchEdge1, open the Exchange Management Shell.
Export a new Edge Subscription file.
C. On ExchEdge1, create a new Send connector named Edge Internet.
Add the * domain as an address space and specify to use DNS to route e ? mail automatically.
Add ExchEdge1 as a source server.
D. On ExchHub1, open the Exchange Management Console.
Import the Edge Subscription file.
Answer: B AND D
19. In your Exchange Server 2007 organization, Microsoft ActiveSync is configured on the Exchange servers but
is currently disabled for users.
A user in the Exchange organization has a new mobile device. He wants h is device to synchronize with the
Exchange servers over a wireless network.
You need to enable the ActiveSync feature for only this user.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Run the Set-Mailbox cmdlet.
B. Run the Set-CASMailbox cmdlet.
C. Run the Set-ActiveSyncMailboxPolicy cmdlet.
D. Use the Active Directory Users and Computers console to enable the ActiveSync feature for the user.
E. Use the Exchange Management Console to enable the ActiveSync feature for the user.
Answer: B AND E
20. Your company is closing its Denver office. The employees in the Denver office have mailbox-enabled user
accounts that use the value Denver in the City attribute.
You disable the user accounts of the Denver employees.
You need to disconnect their mailboxes.
Download Pass4sure 70-238 Dumps from the link below
Download CertifyMe 70-238 Dumps from the link below
Download Testking 70-238 Dumps from the link below
PrepKing.com Microsoft 70-238 Dumps Sample Questions
Exam : Microsoft 70-238
Title : Deploying Messagine Solutions w/MS Exchange Server
1. You are a messaging professional. Your company runs a Microsoft Exchange Server 2007 messaging system.
You have implemented a managed folder mailbox policy that deletes messages that are more than a year old in the
Inbox folder for all users.
The company executives must be exempted from this policy.
You need to ensure that all messages in the Inbox folder of the executives are deleted after three years.
What should you do?
A. Create a new managed default folder of type Inbox named Executive Inbox. Create a managed content setting
for the folder that deletes messages after three years. Create a new managed folder mailbox policy that uses the
folder. Assign the policy to the executives.
B. Create a new custom managed folder named Executive Mailbox. Create a managed content setting for the
folder that deletes messages after three years. Create a new managed folder mailbox policy that uses the folder.
Assign the policy to the executives.
C. Move all executive mailboxes to a dedicated Mailbox server. On the server, configure the Managed Folder
Assistant to never run.
D. Modify the managed content setting for the Inbox folder so that messages will be deleted after three years.
Create a new managed folder mailbox policy that uses the folder. Assign the policy to the executives.
Answer: A
2. You are a messaging professional.
Your company uses a Microsoft Exchange Server 2007 messaging system. The company has enabled anti-spam
features with default settings on the Edge Transport server.
A number of e-mail messages are incorrectly identified as spam.
You need to reduce the number of e-mail messages that are incorrectly identified as spam. You also need to ensure
that your solution enables the Exchange administrators to review the e-mail messages that are identified as spam.
What should you do?
A. Use real-time block lists. Include transport rules that journal all e-mail messages to a central mailbox.
B. Use IP Block lists. Include transport rules for all e-mail messages that are received by any Edge Transport
server to blind copy e-mail messages to a central mailbox.
C. Modify the spam confidence level (SCL) thresholds and enable quarantine for the suspected e-mail messages to
PrepKing.com
store these e-mail messages in a central mailbox.
D. Modify the spam confidence level (SCL) thresholds and enable quarantine for the suspected e-mail messages
to store these e-mail messages in the users junk e-mail folder.
Answer: C
3. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has deployed an Edge Transport server and enabled edge synchronization. Your company uses a
mailbox named Info@adatum.com for public enquiries about the company.
Users report that they receive e-mail messages containing inappropriate content.
You need to reduce the number of inappropriate e-mail messages that the users receive. You also need to ensure
that the Info@adatum.com mailbox receives all the e-mail messages without any filtering on the basis of content.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Implement Realtime Block lists.
B. Implement safelist aggregation for the Info@adatum.com mailbox.
C. Increase the Spam Confidence Level (SCL) on the content filter.
D. Configure the Info@adatum.com mailbox as an exception on the content filter.
Answer: CD
4. You are a messaging professional.
Your company has four offices. Each office has a perimeter network. The perimeter network includes a wireless
access point that allows access for employees and guest users. The perimeter network is created between two
Microsoft Windows Server 2003 computers that run Microsoft Internet Security and Acceleration (ISA) Server
2006.
Each office has an Edge Transport server on the perimeter network, and a Hub Transport server, a Client Access
server, and a Mailbox server on the internal network. One office has a member server that runs Internet
Authentication Service (IAS).
Employees who connect to the wireless access points are not able to receive e-mail messages from the nearest
Exchange server.
You need to ensure that all employee computers that are connected to the wireless access points can retrieve
e-mail messages in the most secure manner. You also need to ensure that guest computers can access the perimeter
PrepKing.com
network by connecting to the wireless access point.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. Configure the wireless access point as a RADIUS client and activate TKIP-PSK security.
B. Configure the internal ISA Server 2006 computer in each office to publish RPC over HTTPS services on the
Client Access Server.
C. Configure the external ISA Server 2006 computer in each office to publish RPC over HTTPS services on the
Edge Transport server.
D. Configure the internal ISA Server 2006 computer in each office as a RADIUS client and configure each
wireless client computer to establish a VPN connection to the nearest ISA Server 2006 computer.
E. Configure the external ISA Server 2006 computer in each office as a RADIUS client and configure each
wireless client computer to establish a VPN connection to the nearest ISA Server 2006 computer.
Answer: BD
5. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company policy has the following requirements:
All members of the sales team must have a folder named Customers in their mailboxes to store e-mail messages
received from customers.
All e-mail messages placed in the Customers folder of individual mailboxes must be accessible to all other
members of the sales team.
Members of the sales team must be able to access the messages by using Microsoft Office Outlook 2003.
You need to meet the outlined requirements.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a distribution group that includes all members of the sales team.
B. Create a managed folder mailbox policy that includes the Customers folder. Assign the policy to the sales team.
C. Create a managed custom folder named Customers. Configure a managed content setting for the folder to
journal e-mail messages to a mail-enabled public folder.
D. Create a managed custom folder named Customers. Configure a managed content setting for the folder to
journal e-mail messages to the SMTP address that is assigned to a Microsoft Windows SharePoint Services
document library.
E. Configure a journal rule that is applied to external e-mail messages sent to the distribution group. Configure the
PrepKing.com
journal rule to send messages to the SMTP address that is assigned to a Microsoft Windows SharePoint Services
document library.
Answer: BC
6. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has a main office and five branch offices. The company has deployed Exchange Server 2007
computers in each office.
The legal department personnel in each office send e-mail messages with an A/C Privileged classification. A
mailbox named AttorneyCommunications is located on a Mailbox server at the main office.
The legal department requires that a copy of all e-mail messages with the message classification of A/C Privileged
be sent to the AttorneyCommunications mailbox.
You need to meet the outlined requirement. You also need to ensure that the rule deployment minimizes the
network bandwidth usage between the offices.
What should you do?
A. Configure a transport rule that will send a copy of all messages with a classification of A/C Privileged to the
AttorneyCommunications mailbox. Disable the transport rules agent on all Hub Transport servers at the branch
offices.
B. Configure a journal rule that will send a copy of all messages sent to or from the legal department to the
AttorneyCommunications mailbox. Disable the journal rules agent on all Hub Transport servers at the branch
offices.
C. Configure a transport rule that will send a copy of all messages with a classification of A/C Privileged to the
AttorneyCommunications mailbox. Disable the journal rules agent on all Hub Transport servers.
D. Configure a journal rule that will send a copy of all messages sent to or from the legal department to the
AttorneyCommunications mailbox. Disable the transport rules agent on all Hub Transport servers.
Answer: C
7. You are a messaging professional.
Your company has deployed Microsoft Exchange Server 2007 computers. The company plans to implement Edge
Transport servers. The Edge Transport servers will be deployed on a perimeter network. The Edge Transport
servers must be configured to use external servers for name resolution.
PrepKing.com
You need to configure the ports that the external firewall will require for inbound and outbound access. Your
solution must also reduce the effort required to configure the Edge Transport servers.
What should you do?
A. Configure the firewall to allow inbound access on TCP port 25 and outbound access on UDP ports 50389 and
50636.
B. Configure the firewall to allow both inbound and outbound access on TCP port 25 and outbound access on TCP
and UDP port 53.
C. Configure the firewall to allow inbound and outbound access on TCP port 25 and outbound access on TCP
ports 50389 and 50636.
D. Configure the firewall to allow inbound and outbound access on TCP port 25 and outbound access on all
dynamic TCP ports greater than 1023.
Answer: B
8. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has the following messaging security requirements:
All e-mail messages sent by the users must be permanently retained.
All e-mail messages sent by the users must be removed from the user mailboxes after 60 days.
You need to meet the outlined requirements.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create a policy that requires all users to enable journaling for all contacts in their contact list.
B. Create a policy that requires all users to use the AutoArchive feature in their Sent Items folder for all the e-mail
messages older than 60 days.
C. Create a managed content setting for the entire Mailbox folder. Configure the setting to remove all the e-mail
messages from the user mailboxes after 60 days.
D. Create a managed content setting for the Sent Items folder. Configure the setting to journal all e-mail messages
that are delivered to the Sent Items folder in the user mailbox.
E. Create a distribution group that includes all the mailbox users. Configure a Journal rule that journals messages
for this distribution group and forwards all the e-mail messages to a dedicated mailbox.
Answer: CE
PrepKing.com
9. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has two offices. Each office is configured as a Microsoft Active Directory site. Exchange Server
2007 computers are deployed on each site.
The company deploys an Edge Transport server in each office. All Internet e-mail messages are sent through the
Edge Transport servers. Custom SMTP connectors are configured on each Edge Transport server.
The companys security policy states that no messages that contain client account numbers can be sent through the
Internet. Users must be able to send these messages to other users inside the organization.
You implement an Edge Transport rule on one of the Edge Transport servers that prevent users from sending
messages that contain client account numbers through the Internet.
A routine audit identifies that messages that contain client account numbers are still being sent through the
Internet.
You need to prevent users from sending e-mail messages that contain client account numbers through the Internet.
You also need to ensure that all other message delivery systems remain unaffected.
What should you do?
A. Export the Edge Transport server configuration on the server where you configured the Edge Transport rule.
Import the configuration on the server that does not have the rule configured.
B. Configure an Edge Transport rule that prevents users from sending messages that contain client account
numbers through the Internet on the Edge Transport server that does not have the rule configured.
C. Delete the Edge Transport rule on the Edge Transport server. Create a Transport rule on a Hub Transport server.
Configure the rule to drop all messages that contain client account numbers.
D. Delete the Edge Transport rule on the Edge Transport server. Create a Transport rule on a Hub Transport server
that assigns a Confidential message classification to all messages that contain client account numbers.
Answer: B
10. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has deployed Edge Transport servers. The Edge Transport servers use the default anti-spam settings.
The SMTP Send connectors and Receive connectors are on an Edge Transport server for a subsidiary company.
The volume of spam increases significantly. In addition, an increase in the number of SMTP connections to the
Edge Transport servers is reported.
You need to reduce the volume of spam without affecting the SMTP connections to the subsidiary company. You
PrepKing.com
want to achieve this goal by using the least amount of administrative effort.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Use the IP Allow List filters on the Edge Transport servers.
B. Use the IP Allow List filters on the Hub Transport servers.
C. Use the IP Allow List providers on the Hub Transport servers.
D. Use the IP Block List providers on the Edge Transport servers.
E. Use the IP Block List filters on the Edge Transport servers.
Answer: AD
11. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has offices in the following locations.
Los Angeles (LA), U.S.
Tokyo, Japan
Occasionally, executives from Tokyo report that business critical e-mail messages to and from the LA office is lost
or delayed. The e-mail support personnel state that they address all Exchange system alerts every morning, but the
reports from LA are more than 12 hours old.
You use Microsoft Operations Manager (MOM) 2005 to report the status of the messaging system.
You need to ensure that the support personnel in Tokyo receive the most current information from LA.
What should you do?
A. Set the Data Transformation Services (DTS) job on the MOM 2005 servers in LA to run at 16:00 hours. (09:00
hours in Tokyo.)
B. Schedule Event Combiner to pull logs from the Exchange servers in LA at 16:00 hours. (09:00 hours in Tokyo.)
C. Configure all Performance Monitor Alerts on the Exchange servers in LA to send messages to the e-mail
support personnel in Tokyo.
D. Install the Microsoft SQL Server Desktop Engine (MSDE) on the MOM 2005 servers in LA. Adjust
permissions on the database to provide access to the Tokyo support personnel.
Answer: A
12. You are a messaging professional. Your company runs a Microsoft Exchange Server 2007 messaging system.
The company has deployed a single Microsoft Active Directory forest that has five Active Directory sites and
eight Active Directory domains. Each domain has 1,200 users.
The company has three Exchange Server 2007 computers on each site.
A Microsoft Windows Server Update Services (WSUS) server is deployed on each site.
The Exchange Server 2007 computers on each site are managed by local administrators.
An Edge Transport server has been deployed and configured on each site. You configure spam filtering on the
Edge Transport servers.
Users are receiving spam e-mail messages. The number of spam messages has been steadily increasing for the last
six months.
You need to define a procedure so that the administrators on each site can review and apply updates that are
required to reduce the number of spam messages that remain undetected by the spam filters.
What should you do?
A. Instruct the administrators on each site to review and approve all updates related to Microsoft Windows Server
2003. Instruct the administrators to apply the updates to the Edge Transport servers.
B. Instruct the administrators on each site to subscribe to a Really Simple Syndication (RSS) feed for the
Exchange Server 2007 servers. Instruct the administrators to regularly review updates to the feed.
C. Instruct the administrators on each site to review the messaging hygiene configuration on the Edge Transport
server. Instruct the administrators to export the Edge Transport server configuration to an .xml file and import the
file every week.
D. Instruct the administrators on each site to apply the Exchange hygiene filter on the WSUS server and approve
all updates related to messaging hygiene on the Exchange Server 2007 servers. Instruct the administrators to apply
the updates to the Edge Transport servers.
Answer: D
13. You are a messaging professional. Your company uses a Microsoft Exchange Server 2007 messaging system.
The company has nine Microsoft Active Directory sites. Your company has one main office, three regional offices
and five branch offices. The administrators in each office have to manage the Exchange Server 2007 computers in
their respective office.
Your current enterprise Exchange monitoring policy includes the use of the Microsoft Exchange Best Practices
Analyzer (ExBPA).
Your company plans to increase the level of detail in the monitoring and reporting of data for the Exchange Server
